Construction Heater Rental
Heat a construction site, hall, workshop or garage in winter and speed up drying after renovation. We rent a 15 kW electric heater (no fumes) and a 30 kW oil heater with a flue that takes exhaust outside. Rent from one day; the daily rate drops noticeably on longer rentals.
Electric or oil — which one?
The 15 kW electric heater produces no fumes or smell, with 5 / 10 / 15 kW settings and a 5–35 °C thermostat. It needs a 400 V three-phase socket. The 30 kW oil heater with flue is an indirect heater: exhaust goes outside through the flue and clean, dry air enters the room. It heats up to about 200 m², runs on a 230 V socket and burns diesel or heating oil at about 1.7 l/h (36 l tank).
Heater and dehumidifier together
A heater alone does not remove moisture — it raises the temperature so water evaporates faster. To stop it condensing on cold walls and windows, take it out of the air by ventilating or with a building dehumidifier.
Frequently asked questions
How much does heater rental cost?
15 kW electric: PLN 29 net per day for 1–3 days, PLN 26 for 4–10, PLN 23 for 11–20 and PLN 20 from 21 days. 30 kW oil heater with flue: PLN 50 / 35 / 30 / 27 net per day at the same thresholds.
How much is the deposit?
PLN 200 for the electric heater and PLN 500 for the oil heater.
Does the 15 kW electric heater run on 230 V?
No, it needs a 400 V three-phase socket. Without one, choose the oil heater — it runs on a standard 230 V socket.
Can the oil heater be used indoors?
Yes — it has a flue, so exhaust is taken outside. The flue must be connected properly and the room ventilated.
Call or write to tell us which heater you need and when — we will check availability and book your dates.
Contact us →