Hilti TE 76-ATC combihammer — SDS-max, drilling up to 40 mm
SDS-max combihammer for drilling concrete and masonry and lighter chiselling. Hammer drilling 12–40 mm, breakthroughs up to 80 mm and core bits 45–150 mm — for anchors, service penetrations and wall breakthroughs. ATC (Active Torque Control) cuts the rotation when the bit jams, e.g. on rebar, instead of twisting the operator’s wrists. 230 V supply, about 8 kg. Drill and core bits are not included; chisels are supplied for chiselling.
Technical data
| Type | młotowiertarka kombi (wiercenie z udarem + kucie) |
| Hammer drilling | 12–40 mm |
| Breakthrough bits | 40–80 mm |
| Core bits | 45–150 mm |
| Rated power | 1300 W |
| Weight | 8,3 kg |
| Tool chuck | SDS-max |
| Safety | ATC — odcięcie obrotów przy zakleszczeniu |
| Power supply | 230 V |
| Chisels | szpicak + płaskie, 15 zł netto / wynajem |
What it is used for
- ▸Drilling anchor holes in concrete
- ▸Penetrations for pipes, cables and ventilation
- ▸Drilling through walls and floors
- ▸Lighter chiselling of channels and openings
FAQ
Are drill bits included?
No. Drill and core bits wear very differently depending on material and rebar, so customers use their own (SDS-max shank). Chisels are supplied for chiselling.
What is ATC?
Active Torque Control — when the bit jams, e.g. on rebar, the combihammer cuts the rotation instead of spinning in your hands. Release and press the switch again to resume.
Which hammer is right for my job?
An overview of all our hammers — from a light one for walls to a 30 kg breaker for floors — with guidance on which suits what is on our demolition hammer rental page.
How much is a day and how much is a week?
For 1–2 days a day costs PLN 60 net, and for 3–6 days PLN 50 net. For rentals of 7 days or longer the weekly rate applies: PLN 252 net per week, i.e. PLN 36 per day — extra days are charged at the same rate.
How much is a weekend rental?
A weekend (Friday from 1 pm to Monday by 8 am) is charged as a single day: PLN 60 net.
Are chisels included?
We supply a point chisel and a flat chisel with the hammer. The chisel fee is PLN 15 net per started week of rental and covers sharpening after return. Wide or spade chisel: +PLN 10. A broken or unreturned chisel is charged at the price of a new one.
What power supply is needed?
A standard 230 V socket. With a long extension lead use a cable of adequate cross-section — a cable that is too thin reduces the hammer’s power and overheats.
