Hilti TE 700-AVR chisel hammer — 11.5 J, 8 kg
Light chisel hammer for walls and horizontal work: 11.5 J impact energy at about 8 kg. For removing wall tiles and plaster, chasing channels for installations and breaking through masonry — typical bathroom and kitchen renovation work. A 100/70% power switch allows gentler work on thin walls. Active Vibration Reduction (AVR). 230 V supply, SDS-max chuck.
Technical data
| Impact energy | 11,5 J |
| Impact rate | 2760 /min |
| Rated power | 1300 W |
| Weight | 7,9 kg |
| Tool chuck | SDS-max |
| Working direction | ściany, poziomo i w dół |
| Power selection | 100% / 70% |
| Vibration (a_h) | 6,5 m/s² (AVR) |
| Power supply | 230 V |
| Chisels | szpicak + płaskie, 15 zł netto / wynajem |
What it is used for
- ▸Removing tiles and adhesive from walls
- ▸Removing plaster
- ▸Chasing channels for electrical and plumbing installations
- ▸Breaking through and enlarging openings in masonry
FAQ
Can this hammer drill?
No — the TE 700 only chisels, it has no rotation. For drilling concrete use the Hilti TE 76-ATC combihammer.
Which hammer is right for my job?
An overview of all our hammers — from a light one for walls to a 30 kg breaker for floors — with guidance on which suits what is on our demolition hammer rental page.
How much is a day and how much is a week?
For 1–2 days a day costs PLN 70 net, and for 3–6 days PLN 56 net. For rentals of 7 days or longer the weekly rate applies: PLN 287 net per week, i.e. PLN 41 per day — extra days are charged at the same rate.
How much is a weekend rental?
A weekend (Friday from 1 pm to Monday by 8 am) is charged as a single day: PLN 70 net.
Are chisels included?
We supply a point chisel and a flat chisel with the hammer. The chisel fee is PLN 15 net per started week of rental and covers sharpening after return. Wide or spade chisel: +PLN 10. A broken or unreturned chisel is charged at the price of a new one.
What power supply is needed?
A standard 230 V socket. With a long extension lead use a cable of adequate cross-section — a cable that is too thin reduces the hammer’s power and overheats.
